News & Events

Belt conveyor routine maintenance tips

Belt conveyor routine maintenance tips

1. Should try to avoid frequent start in a short period, under normal circumstances, the conveyor belt requires no load start.
2. You must always check the hydraulic couplings and reducer to have oil leakage or not, oil content should be regularly checked, and oil is eligible or not and do timely replacement or supplement.
3. If the drive pulley screams, indicating belt slippage, then check whether the belt is too much tensioned and do timely adjustment.
4. Belt joints should be regularly checked and found if there is damage, if damage exists, shall promptly cut off damage and redo, great care cut must be perpendicular to the center line of belt when redone.
5. the loading point should ensure that cargo is unloaded in the middle of the belt, larger direct unloading height are not allowed to prevent damaging the belt and causing the belt deviation.

Leave Message

If you have any problems or questions about our products or need our support and assistance, please feel free to write us, we will reply to you within 24 hours, and never reveal your information to the third party. Thank you!



Subscribe to Updates

Subscribe to UNIQUE News and keep up to date with all our activities and events.

Capacity

UNIQUE products all over the country, exported to more than 50 countries and regions.

Contact Us

Add:San Li Zhuang Industrial Park,Xingyang,Zhengzhou,China

FAQ's| Contact Us| Site Map